A Comprehensive Guide to Electronic Hook Switch

 An Electronic Hook Switch (EHS) is a cord that connects a desk phone to a wireless headset base. With an EHS, you can handle calls right from the headset, so you don’t need a motorized line lifter. The wires and EHS procedures used by different phone makers are not all the same because there is no one standard for an EHS.

Why Is Using an Electronic Hook Switch A Good Idea?

An electronic hook switch eliminates the need for mechanical methods like moving a receiver. It also ensures that the function is stable and doesn’t wear out.

• Most speakers that are compatible with the Electronic Hook Switch will work with it.
• Thanks to the ability to make or receive calls directly from the headset, the user is free to move about within a specified range and be flexible with his job.
• When an employee switches calls between the headset and the phone, the calls can be sent back to the regular speaker when they get back to the phone.
• Another benefit is that you don’t have to buy expensive phones because the Electronic Hook Switch works with many regular telephones.

The Electronic Hook Switch works

The Electronic Hook Switch can be used for many things when you’re on a mobile call. The following features are usually built into the devices:

• Calls are shown on the headset, and the phone sound is often turned off.
• Taking a call through the headset.
• Calls can be switched between the headset and the phone.
• Turning off the phone.
• You can change the volume and make sure that the headset and phone both have the same volume level.

Some Electronic Hook switches might have extra features depending on the phone system being used.

How Do You Determine Which Electronic Hook Switch Is Suitable For You?

It’s more complex than you might think. In an office, there are many possible device combinations, and each one needs a different Electronic Hook Switch wire or cable. There are two steps to this. First, check to see if the EHS cords work with both the desk phone and the headset. Some brands need different cords, while others can be used with any brand. Then, check the EHS product information to make sure it works with your devices.

Comparison between EHS Wires and HL10 Lifters

The Electronic Hook Switch (EHS) cord can be added to wireless speakers to let you answer the phone when you’re not at your desk. People who have EHS cords or cables can answer the phone when it rings, even when they’re not at work. Otherwise, they would have to use an HL-10 cellphone lifter or answer the phone directly without an EHS wire.

The HL10 lifter and EHS cable both do the same thing, but they do it in very different ways. The HL10 works by moving the phone’s handset to answer a call. The EHS wire, on the other hand, works electronically by telling the phone’s circuits to answer the call. The EHS wire can be thinner and smaller than an HL10 because it doesn’t have to lift a handset physically. Plus, it doesn’t need to be stuck to the side of your phone. Using the EHS cable will keep your phone looking neat and tidy.

Conclusion

An electronic hook switch (EHS) is a device that connects a wireless headset and phone using electronic technology. An EHS successfully follows predetermined signals. You can use either a Bluetooth headset or a DECT headset. Users have the convenience of handling calls with just the headset, allowing them to move around freely without being tied to the phone. Switching from a handset to a headset is usually done by pressing a designated button.